Read all instructions before installing or using this appliance.
Installation Instructions
Save these instructions for future reference.
Assemble the range
Fit the Door Handles
Remove the 4mm Hex headed screws from the doors with the hexagon key tool. Use the screws to fit the door handles.
The handles should be above the fixings.
Fit the plastic blanking plugs to the fixing holes.
Fit the Handrail
Remove the 4mm Hex headed screws from the top corners of the fascia.
Fix the front handrail in position. Fit the plastic blanking plugs to the fixing holes.
Fitting the rear spacer (optional - but required for 24’’ deep cabinets)
The two end caps (one each end) of the standard rear flue grille must first be removed.
They are held in place by two fixing nuts on the inside face.
The rear spacer is fitted using 4 screws in the rear edge of the flue grille, two at each end. Fit the spacer over the inner screws and then fit the outer two screws. (see figure).
Rear spacer.
40
