Read all instructions before installing or using this appliance.
Installation Instructions
Save these instructions for future reference.
Checking the parts
Check that the range has the following parts.
Leveling tool & Allen keys | Broiler pan and trivet |
Meat tin | Handyrack |
anti tip device kit | 6 oven racks |
Splashback & Plinth | Rear spacer |
Miscellaneous parts pack (rear spacer end caps, fixings, ground strap ect.)
Leveling the Range
Place the range in its intended position taking care not to twist it within the gap between the kitchen units as damage may occur to the range or the units. Install the oven shelves in the oven. Check for levelness by placing a spirit level or a cup, partially filled with water, on one of the oven grids. If using a
spirit level, take two
The rollers can be adjusted to level the range. To adjust the height of the rear of the range use the leveling tool supplied to turn the adjusting nuts at the front bottom corners of the range.
Adjust the height of the front roller to level the range. Turn clockwise to raise the range and counter clockwise to lower.
When you are satisfied with the height and level raise the front of the range by one turn of the front roller adjuster. Screw down the front feet to meet the floor. Screw the front roller adjuster counter clockwise to raise the front roller so that the front of the range is supported on the feet, not the front roller, to prevent accidental movement of the range.
Leave the leveling tool in the storage drawer, so that the customer can use it if they wish to move the range.
Anti-Tip Device
WARNING
Range must be secured by the
Installing the Anti-Tip Device
The
36