Read all instructions before installing or using this appliance.
Installation Instructions
Save these instructions for future reference.
How To Remove the Range for Servicing
Follow these procedures to remove appliance for servicing:
The range is very heavy. Take great care. We recommend two people maneuver the range. Ensure that the floor covering is firmly attached, or removed to prevent it being disturbed when moving the range around. You will need the leveling tool.
Pull the drawer out to its furthest point.
Lift up the ends of the plastic clips (one each side) to release the catches holding the drawer to the side runners and at the same time pull the drawer forward and away from the side runners. For safety’s sake push the drawer runners back out of the way. Put the drawer somewhere safe - do not refit it until you have finished, you will need access to the area behind the drawer.
Fit the leveling tool on the rectangular adjuster as shown below.
Lower the front roller by turning the leveling tool clockwise until the front feet are just clear of the floor.
Slide range forward to disengage the range from the
Disconnect electrical supply to appliance and unplug the electrical supply cord.
Reverse procedure to reinstall.
If your range is removed for any reason, make sure the
43
