AGFA AP1100 E

ENGLISH

Thank you for purchasing our new photo printer. With this high quality printer you can get the most

out of your digital photos.

The "Crystal Image" and "Red-eye" image optimising functions provide faultless print and copy quality

of your photos.

You will also find the following on the web site www.agfaphotoprinter.com:

• print drivers for PCs,

• a list of answers to frequently asked questions (FAQ).

Do not install your photo printer in a humid room (bathroom, laundry, kitchen, etc.), or within

1.50 m of a tap or water source, or outside. The printer should be operated within an ambient

temperature range of 10 °C to 35 °C. Your printer should be used at an ambient temperature

of between 15°C and 35°C for optimum printing results.

Do not set up your printer in a dusty environment as dust deposits might adversely affect the

print quality of your photos.

Only use the power supply that is supplied (PF60N24AS0 of Shanghai Moons' Automation

Control Co., Ltd). Connect it to a mains outlet in compliance with the installation instructions in

this booklet and the indications stated on the identification label located on the unit (voltage,

current and frequency of the electricity network). As a precaution, in case of danger, the mains

adapters act as a disconnecting mechanism for the 230V power supply. They should be placed

near the device and should be easily accessible.

Never open the top cover when the printer is operating, as you risk breaking the film that may

result a printer malfunction.

After using the printer, wait a few moments after switching the printer off before opening it. To

avoid injury, never touch the print head.

Only use AgfaPhoto consumables, if not you are likely to damage the equipment and

invalidate the guarantee. To obtain the references of the consumables, refer to paragraph

Consumables, page7.

The CE marking certifies that the product meets the main requirements of the European

Parliament and Council directive 1999/5/CE on telecommunications terminal equipment,

regarding safety and health of users, and regarding electromagnetic interference.

The declaration of compliance can be consulted on the site www.agfaphotoprinter.com, or

can be requested at the following address:

AGFAPHOTO is used under licence of Agfa-Gevaert AG

AP1100 is produced for Sagem Communication and distributed or sold by Sagem Communication

Sagem Communication - Customer relations department

4, rue du Petit Albi - 95800 Cergy Saint-Christophe - FRANCE

AP1100 n-b.book Page 1 Jeudi, 21. septembre 2006 11:17 11