AGFA HE/001132 manual Basic Grayscale Image Box SOP Class, N-CREATE Status Codes, ∙ N-Set

HE/001132	Page 39 of 92
	Document No.001132, Revision 2.0
Agfa HealthCare	NodeID Livelink : 14140190
	14 June, 2007

Attribute Name			Tag	Value
Configuration Information			(2010,0150)	Configurable
Illumination			(2010,015E)	Configurable
Reflective Ambient Light			(2010,0160)	Configurable
Referenced	Film	Session	(2010,0500)	A sequence which provides references to a Film Session SOP
Sequence				Class/Instance pairs. Only a single Item is permitted in this
				Sequence.
>Referenced SOP Class UID			(0008,1150)	Uniquely identifies the referenced SOP Class
>Referenced SOP Instance UID			(0008,1155)	Uniquely identifies the referenced SOP Instance.
Referenced	Presentation LUT		(2050, 0500)	A sequence which provides references to a Presentation LUT
Sequence				related SOP Class/Instance pairs. Only a single Item shall be
				included in this sequence.
>Referenced SOP Class UID			(0008, 1150)	Uniquely identifies the referenced SOP Class
>Referenced SOP Instance UID			(0008, 1155)	Uniquely identifies the referenced SOP Instance.

"Workstation" (SCU) will process the N-CREATE confirmation and response Status codes. The status codes below are recognized:

Table 2.2-28: N-CREATE Status Codes

Code	Status	Meaning
0000	Success	Normally returned by the SCP AE. Film Box successfully created.
B605	Warning	Requested Min Density or Max Density outside of printer’s operating range. The printer will use its
		respective minimum or maximum density value instead.
*	Other	Other Dicom error codes result in the failure of the job. Other warnings are not communicated to
	Status	the user.
	codes

2.2.2.3.1.3.3Basic Grayscale Image Box SOP Class (1.2.840.10008.5.1.1.4)

The Basic Image Box IOD is an abstraction of the presentation of an image and image related data in the image area of a film. The Basic Image Box IOD describes the presentation parameters and image pixel data which apply to a single image of a sheet of film.

The Basic Grayscale Image Box SOP Instance is created by the SCP at the time as the Basic Film Box SOP Instance (§ 2.2.2.3.1.3.2) is created, based on the value of the Basic Film Box Attribute Image Display Format (2010, 0010).

The Basic Grayscale Image Box SOP Instance refers to zero or one Image Overlay Box SOP Instance and zero or one Presentation LUT SOP Instance.

"Workstation" (SCU) can send the following DIMSE services:

∙N-SET

N-SETis issued by "Workstation" (SCU) to update an instance of the Grayscale Image Box SOP Class.

When all needed Basic Grayscale Image Boxes have been set, "Workstation" (SCU) issues a print command. There can be empty image positions. By using N-SET, "Workstation" (SCU) can instruct the SCP to erase the image in the image position by setting a zero length and no value in the attribute Basic Grayscale Image Sequence. The N-Set attributes for the Basic Grayscale Image Box are listed below: