HE/001132 | Document No. 001132, Revision 2.0 | Page 32 of 92 |
Agfa HealthCare |
| |
NodeID Livelink : 14140190 | 14 June, 2007 | |
|
|
|
Table 2.2-16: Storage Commitment N-EVENT-REPORT Behavior
Event Type Name |
| Event | Type | Behavior | |
|
|
| ID |
|
|
Storage | Commitment | Request | 1 |
| The job will be marked as SUCCESSFUL |
Successful |
|
|
|
|
|
Storage | Commitment | Request | 2 |
| The job will be marked as FAILED. |
Complete – Failure exists |
|
|
|
|
The reasons for returning specific status codes in a
Table
Service | Further Meaning | status Code | Reasons |
Status |
|
|
|
Success |
| 0000 | The SCP has successfully returned all matching |
|
|
| information. |
The behavior of the DICOM Store AE when receiving Event types over this association is the same as when receiving them over the same association as documented in section 2.2.1.3.1.3.2
2.2.1.4.1.4SOP Specific Conformance – Verification SOP Class (1.2.840.10008.1.1)
The Storage AE provides standard conformance to the Verification SOP Class as an SCP. This verification is accomplished on an established Association using the
These tests can be executed in the "Workstation Service & Configuration Tool".
The Configuration Tool opens an association when testing of a remote application is requested during a configuration session. This can be done when entering new data for remote application configuration or to verify existing configuration data using the