Agilent Technologies 5203 manual Supply Current

13

Agilent offers two such compatible Duplex SC connec- tored jumper cable assemblies to assist you in the evaluation of these transceiver products. These cables may be purchased from Agilent with the following part numbers.

1. HFBR-BKD001

A duplex cable 1 meter long assembled with 62.5/125 μm fiber and Duplex SC connector plugs on both ends.

2. HFBR-BKD010

A duplex cable 10 meters long assembled with 62.5/125 μm fiber and Duplex SC connector plugs on both ends.

Accessory Duplex ST

Connectored Cable Assemblies Agilent recommends the use of Duplex Push-Pull ST connectored cable for optimal repeatibility of the optical power coupling.

HFBR-5203,-5204 and -5205 Series Transmitter Electrical Characteristics (TA = 0°C to 70°C, VCC = 4.75 V to 5.25 V)

Parameter	Symbol	Min.	Typ.	Max.	Unit	Reference
Supply Current	ICC		145	185	mA	Note 3
Power Dissipation	PDISS		0.76	0.97	W
Data Input Current - Low	IIL	-350	0		μA
Data Input Current - High	IIH		14	350	μA

HFBR-5203,-5204 and -5205 Series Receiver Electrical Characteristics (TA = 0°C to 70°C, VCC = 4.75 V to 5.25 V)

Parameter	Symbol	Min.	Typ.	Max.	Unit	Reference
Supply Current	ICC		82	145	mA	Note 4
Power Dissipation	PDISS		0.3	0.5	W	Note 5
Data Output Voltage - Low	VOL - VCC	-1.840		-1.620	V	Note 6
Data Output Voltage - High	VOH - VCC	-1.045		-0.880	V	Note 6
Data Output Rise Time	tr	0.35		2.2	ns	Note 7
Data Output Fall Time	tf	0.35		2.2	ns	Note 7
Signal Detect Output Voltage - Low	VOL - VCC	-1.840		-1.620	V	Note 6
Signal Detect Output Voltage - High	VOH - VCC	-1.045		-0.880	V	Note 6
Signal Detect Output Rise Time	tr	0.35		2.2	ns	Note 7
Signal Detect Output Fall Time	tf	0.35		2.2	ns	Note 7