Pin Depth Limits | Agilent Technologies 85054-90049 instruction

Specifications

Mechanical Characteristics

NOTE	The gages for measuring type-N connectors compensate for the designed
	offset of 5.26 mm (0.207 inch), therefore, protrusion and recession readings
	are in relation to a zero reference plane (as if the inner and outer conductor
	planes were intended to be flush). Gage readings can be directly compared
	with the observed values listed in Table 2-2.

The pin depth value of each calibration device in this kit is not specified, but is an important mechanical parameter. The electrical performance of the device depends, to some extent, on its pin depth. The electrical specifications for each device in this kit take into account the effect of pin depth on the device’s performance. Table 2-2lists the typical pin depths and measurement uncertainties, and provides observed pin depth limits for the devices in the kit. If the pin depth of a device does not measure within the observed pin depth limits, it may be an indication that the device fails to meet electrical specifications. Refer to Figure 2-1for an illustration of pin depth in type-N connectors.

Table 2-2 Pin Depth Limits

Device	Typical Pin Depth	Measurement	Observed Pin Depth
	micrometers	Uncertaintya	Limitsb
	(10–4inches)	micrometers	micrometers
		(10–4inches)	(10–4inches)

Opens	0 to −12.7	+3.8 to −3.8	+3.8 to −16.5
	(0 to −5.0)	(+ 1.5 to −1.5)	(+ 1.5 to −6.5)

Shorts	0 to −12.7	+3.8 to −3.8	+3.8 to −16.5
	(0 to −5.0)	(+ 1.5 to −1.5)	(+ 1.5 to −21.5)

Lowband	0 to −50.8	+3.8 to −3.8	+3.8 to −54.6
loads	(0 to −20.0)	(+ 1.5 to −1.5)	(+ 1.5 to −21.5)

Sliding loads	0 to −7.6	+3.8 to −3.8	+3.8 to −11.4
	(0 to −3.0)	(+ 1.5 to −1.5)	(+ 1.5 to −4.5)

Adapters	0 to −50.8	+3.8 to −3.8	+3.8 to −54.6
(7 mm end)	(0 to −20.0)	(+ 1.5 to −1.5)	(+ 1.5 to −21.5)

Adapters	0 to −12.7	+3.8 to −3.8	+3.8 to −16.5
(type-N end)	(0 to −5.0)	(+ 1.5 to −1.5)	(+ 1.5 to −6.5)

a.Approximately +2 sigma to −2 sigma of gage uncertainty based on studies done at the fac- tory according to recommended procedures.

b.Observed pin depth limits are the range of observation limits seen on the gage reading due to measurement uncertainty. The depth could still be within specifications.

NOTE	When measuring pin depth, the measured value (resultant average of three
	or more measurements) is not the true value. Always compare the measured
	value with the observed pin depth limits in Table 2-2to evaluate the
	condition of device connectors.

2- 4

85054B

85054-90049 specifications

Agilent Technologies 85054-90049 is a high-performance calibration kit designed for vector network analysis across a wide range of frequencies. This kit is an indispensable tool for engineers and technicians involved in the measurement and characterization of RF components, ensuring accuracy and reliability in their testing processes.

One of the main features of the 85054-90049 calibration kit is its ability to provide accurate calibration across multiple frequency bands, including microwave and millimeter-wave frequencies. This versatility is crucial for professionals who work with different types of RF devices, such as amplifiers, filters, and antennas. The kit supports a frequency range of up to 67 GHz, making it suitable for a variety of applications in the telecommunications and aerospace industries.

The calibration kit utilizes precision standards and adapters that ensure low insertion loss and minimal reflection. These components are engineered to provide high stability and repeatability in measurements, which is vital for maintaining quality control in manufacturing processes or during research and development stages. The accuracy of the calibration is further enhanced by the materials used in the construction of the connectors and adapters, which are designed to minimize signal degradation.

Another key technology employed in the Agilent 85054-90049 is its rugged design, intended to withstand the demands of laboratory environments as well as field applications. The kit is portable, allowing engineers to perform precision measurements wherever needed without compromising on performance. Its compact design and durable case make it an ideal choice for field applications.

The 85054-90049 calibration kit is also compatible with Agilent's range of vector network analyzers, creating a seamless user experience. The calibration process, supported by comprehensive software tools, is designed to be user-friendly, allowing technicians to perform calibrations quickly and accurately. In addition, the kit comes with detailed documentation that includes calibration procedures, ensuring that even those new to RF testing can follow along with ease.

In summary, the Agilent Technologies 85054-90049 is a state-of-the-art calibration kit that combines high performance, compatibility, and durability. Its advanced features cater to various RF testing needs, making it a vital resource for professionals in industries where precision measurements are of utmost importance. Whether in laboratories or field settings, this calibration kit stands out as a benchmark for quality in RF and microwave measurement applications.

Agilent Technologies 85054-90049 manual Pin Depth Limits

Models: 85054-90049

Table 2-2 Pin Depth Limits

85054-90049 specifications