![](/images/new-backgrounds/1240989/240989125x1.webp)
Standard Definitions
Standard Class Assignments
Table A-6 Blank Form for the PNA Series Network Analyzers
| Calibration Kit Label: |
| ________________________ |
|
|
Class | Aa |
S11A
S11B
S11C
S21T
S22A
S22B
S22C
S12T
a.For additional ports, make sure values match the correct sex of the port.
IMPORTANT The following calibrations are only supported by certain PNA analyzers. See your PNA series network analyzer embedded help system.
Notes:
1.If you are performing a TRL calibration:
•S21T and S12T must be defined as thru standards.
•S11A and S22A must be defined as reflection standards.
•S11B, S11C, S22B, and S22C must be defined as line standards.
2.If you are performing a TRM calibration:
•S21T and S12T must be defined as thru standards.
•S11A and S22A must be defined as reflection standards.
•S11B, S11C, S22B, and S22C must be defined as match standards.
3.If you are performing an LRM calibration:
•S21T and S12T must be defined as line standards.
•S11A and S22A must be defined as reflection standards.
•S11B, S11C, S22B, and S22C must be defined as match standards.
85054B |