Agilent Technologies 85054-90049 Table A-7 Standard Definitions for the 8510 Network Analyzer

Standard Definitions

Nominal Standard Definitions

Table A-7 Standard Definitions for the 8510 Network Analyzer

System Z0a = 50.0 Ω							Calibration Kit Label: TYPE N B.2
Disk File Name: CK_NTYPB2							File Number: * FILE 1
				2	3
		F	F/Hz	F/Hz	F/Hz		Offset			Frequency
Standardb		−15	−27	−36	−45					in GHzd
		×10	×10	×10	×10							Coax or Waveguide
		C0	C1	C2	C3	c
						Fixed orSliding							Standard Label
				2	3
Number		H	H/Hz	H/Hz	H/Hz				Loss in GΩ/s
		−12	−24	−33	−42		Delay
	Type	L0 ×10	L1 ×10	L2 ×10	L3 ×10			Ω		Min	Max
								0
								Z
1	Shorte	−0.1315	606.21	−68.405	2.0206		27.990	50	1.3651	0	999	Coax	Short (m)f
2	Opene	104.13	−1943.4	144.62	2.2258		22.905	50	0.93	0	999	Coax	Open (m)f
3	Shorte	0.7563	459.88	−52.429	1.5846		63.078	50	1.1273	0	999	Coax	Short (f)f
4	Opene	89.939	2536.8	−264.99	13.4		57.993	50	0.93	0	999	Coax	Open (f)f
5
6
7
8
9	Load					Fixed	0	50	0	0	999	Coax	Broadband
10	Load					Sliding	0	50	0	1.999	999	Coax	Sliding
11	Delay/						0	50	0	0	999	Coax	Thru
	thru
12	Load					Fixed	0	50	0	0	2.001	Coax	Lowband
13	Delay/						134.82	50	2.2	0	999	Coax	f-f adapter
	thru
14	Delay/						196	50	2.2	0	999	Coax	m-m
	thru												adapter
15
16
17
18
19
20
21

a.Ensure system Z0 of network analyzer is set to this value.

b.Open, short, load, delay/thru, or arbitrary impedance.

c.Load or arbitrary impedance only.

d.For waveguide, the lower frequency is the same as FCO.

e.Typical values only. Disk values may be different.

f.Standard labels which specify ex, (m) or (f), refer to the sex of the test port connector.

A-12 85054B