Agilent Technologies 85054-90049 manual Electrical Specifications, Certification

Specifications

Electrical Specifications

Electrical Specifications

The electrical specifications in Table 2-3apply to the devices in your calibration kit when connected with an Agilent precision interface.

Table 2-3 Electrical Specifications

Device	Frequency (GHz)	Parameter	Specification
Lowband loads	DC to £2	Return Loss	³48 dB (£0.00398r)
Sliding loadsa	> 2 to £18	Return Loss	³42 dB (£0.00794r)
Adapters	DC to £8	Return Loss	³34 dB (£0.0200r)
(both styles)	> 8 to £18	Return Loss	³28 dB (£0.0398r)
b	at 18	Deviation from Nominal	±1.5°
Offset Opens		Phase
b	at 18	Deviation from Nominal	±1.0°
Offset Shorts		Phase

a.The specifications for the sliding load termination include the quality of the airline portions within the sliding load combined with the effective stability of the sliding element.

b.The specifications for the opens and shorts are given as allowed deviation from the nominal model as defined in the standard definitions (see “Nominal Standard Definitions” on page A-11).

Certification

Agilent Technologies certifies that this product met its published specifications at the time of shipment from the factory. Agilent further certifies that its calibration measurements are traceable to the United States National Institute of Standards and Technology (NIST) to the extent allowed by the institute’s calibration facility, and to the calibration facilities of other International Standards Organization members. See “How Agilent Verifies the Devices in This Kit” on page 4-2for more information.

85054B 2-5