265
Chapter 5, Advanced Operations
Status Reporting
Accessing the Error Message Queue
A message appears in the Error Message Queue any time bit 2, 3, 4, or 5 of the
Standard Event Status register is asserted. Each message consists of a signe d err or
number, followed by a comma separator, followed by an error descriptio n string in
double quotes. The maximum length of the error description string is 255
characters. If more than 20 messages are in the queue and another error occurs, the
last message is replaced with the message, -350,"Queue overflow". If no
messages are in the queue the message, +0,"No error" is returned. Reading a
message removes it from the queue. The Error Message Queue is accessed using
the SYSTem command. Returned information is read into a numeric variable
followed by a string variable.
Reading the Error Message Queue
Syntax
SYSTem:ERRor?
Example
OUTPUT 714;"SYST:ERR?"
ENTER 714;Error_num,Error_msg$
Example IBASIC program
10 INTEGER Error_num
20 DIM Error_msg$ [255]
30 OUTPUT 714;"SYST:ERR?"
40 ENTER 714;Error_num,Error_msg$
50 PRINT Error_num;Error_msg$
60 END
Example response
-113 "Undefined header"