82
S:\agilent\8920\8920b\PRGGUIDE\BOOK\CHAPTERS\guidelin.fb
Chapter 3, GPIB Command Guidelines
Guidelines for Operation
For each measurement that can be made using the Data Functions, there is a
default set of values for each Data Function for that measurement.
For example, the Audio Frequency Analyzer Distortion measurement can be
made using all of the Data Functions. This would include REF SET, METER,
AVG, HI LIMIT and LO LIMIT. A complete listing of the Distortion
measurement’s Data Functions and their default values would appear as follows:
• The Attribute units are: PCT
• The number of Averages is: 10
• The Average state is: 0
• The Reference value is: 1
• The Reference Display units are: PCT
• The Reference state is: 0
• The High Limit is: 0
• The High Limit Display units are: PCT
• The High Limit state is: 0
• The Low Limit is: 0
• The Low Limit Display units are: PCT
• The Low Limit state is: 0
• The Meter state is: 0
• The Meter high end setting is: 10
• The Meter high end Display units are: PCT
• The Meter low end setting is: 0
• The Meter low end Display units are: PCT
• The Meter interval is: 10
The Data Functions are set to their defaul t v alues whenever
• the power is cycled on the Test Set
• the front-panel PRESET key is selected
• the *RST Common Command is received through GPIB