ESG Family Signal Generators | Getting Started |
| Saving and Recalling an Instrument State |
Saving and Recalling an Instrument State
Using this procedure, you will learn how to save instrument settings to a memory register and to recall the settings.
Creating an Instrument State
1.Press Preset.
2.Press Frequency.
3.Enter 800 using the numeric keypad and press the MHz softkey.
4.Press Amplitude.
5.Enter 0 using the numeric keypad and press the dBm softkey.
6.Press AM followed by the AM Off On softkey.
This sets the signal generator to its
Frequency becomes the active function and the preset value for frequency is displayed in the active entry area.
The new carrier frequency (800.000 000 00 MHz) is shown in both the FREQUENCY area and the active entry area of the display.
Amplitude becomes the active function, and the preset value for amplitude is displayed in the active entry area.
The new power level (0.00 dBm) is shown in both the AMPLITUDE area and the active entry area of the display.
AM toggles from Off to On. Notice also that the AM display annunciator is turned on, indicating that you have enabled amplitude modulation. You have now created an example instrument state that you will save and recall.
Quick Start Guide |
