
Exploring the User Interface | ESG Family Signal Generators | |
Front Panel |
| |
11. | Return | The Return key cancels the current active function and moves you |
|
| from your current softkey menu to the softkey menu that precedes |
|
| it. |
12. | Display | Press this key and hold it down to cause the display background to |
| Contrast | darken in comparison to the text on the display. |
| Decrease |
|
13. | Display | Press this key and hold it down to cause the display background to |
| Contrast | brighten in comparison to the text on the display. |
| Increase |
|
14. | Local | Press this key to return the signal generator to local (front panel) |
|
| control from remote operation. |
15. | Preset | Press this key to set the signal generator to a known state (either |
|
| the |
16.Standby LED This yellow LED lights when the instrument is in standby condition. In standby, the power switch is off but the instrument is still connected to the main power circuit by way of the power cord.
17. Line Power | This green LED lights when power is cycled on to the signal |
LED | generator. |
18.Power Switch Press this hardkey to turn power to the signal generator either on
(green LED on) or to standby (yellow LED on).
19. | Q INPUT | This connector accepts an externally supplied, analog, |
|
| |
|
| connector is provided only on |
|
| Generators. |
20. | I INPUT | This connector accepts an externally supplied, analog, |
|
| component of I/Q modulation. This female BNC connector is |
|
| provided only on |
Quick Start Guide |