ﬁle system, With Option UN8 | Agilent Technologies E4400-90326

Exploring the User Interface	ESG Family Signal Generators
Front Panel
30. Recall	This hardkey lets you restore any instrument state that you
	previously saved in a memory register. You can save up to 100
	different instrument states in a combination of 100 memory
	registers and 10 register sequences. The number of states you can
	save, however, is limited by the size of whatever else is stored in the
	ﬁle system.

31.DATA Input The TTL/CMOS-compatible DATA connector accepts an externally supplied data input for digital modulation applications. This female BNC connector is provided only on instruments with Option UN8.

32.DATA CLOCK The TTL/CMOS-compatible DATA CLOCK connector accepts an

Input	externally supplied data-clock input for digital modulation
	applications. This female BNC connector is provided only on
	instruments with Option UN8.

33.SYMBOL SYNC The CMOS-compatible SYMBOL SYNC connector accepts the

Input	digital-modulation symbol synchronization signal from an external
	source. This female BNC connector is provided only on instruments
	with Option UN8.
34. PULSE IN	This connector accepts an externally supplied TTL-compatible pulse
	signal. The pulse signal is activated with the Fast Pulse Off On
	softkey or via SCPI command. The maximum input for this
	connector is ±15 volts. This female BNC connector is provided only
	on instruments with Option 1E6.

2-6	Quick Start Guide

Image 22

Agilent Technologies E4400-90326 This hardkey lets you restore any instrument state that you, ﬁle system, With Option UN8

Contents

Part No. E4400-90326 Agilent Technologies ESG Family Signal GeneratorsSupersedes April Copyright 1999, 2000 Agilent Technologies Contents Getting Started Signal Generator at a Glance Setting the Power Level Creating an FM SignalSetting the Carrier Frequency Press Preset RF Output connector Setting the FM DeviationSetting the FM Rate Turning On Frequency Modulation State Creating a Step Sweep and a List SweepConﬁguring a Step Sweep ﬁrst level of sweep softkeys is displayed Press Return RF ON. The swept RF signal is now available atTurning On Continuous Step Sweep Press Conﬁguring a List Sweep Using Step Sweep Data Turned off Turning On List Sweep for a Single SweepData You triggered the single sweep in the previous step Saving and Recalling an Instrument State Creating an Instrument State Recalling an Instrument State Saving an Instrument StatePress Save followed by Setting Up a Digital Modulation in the GSM Format Enter −5 using the numeric keypad and press the dBm softkey This selects the GSM communications standard Setting Up TimeslotSelecting the Data Format Conﬁgure Timeslots has become an active softkey Press the following softkeys Press the Timeslot Type softkey Press the Normal softkeyThis moves the softkey menu up one level Turning On the GSM Format and the Modulation Press Return twice Exploring the User Interface Front Panel Associated with the event ConnectorWill be returned to normal instrument operation Numeric keypad consists of the digit keys 0 through 9, a Provided only on ESG-D and ESG-DP Series Signal Generators This connector accepts an externally supplied, analogComponent of I/Q modulation. This female BNC connector is Darken in comparison to the text on the display To their adjacent keys are located on the right-hand side Frequency and power capabilitiesLCD display provides information on the current instrument Display Softkey or via Scpi command. The maximum input for this This hardkey lets you restore any instrument state that youApplications. This female BNC connector is provided only on Previously saved in a memory register. You can save up to Display Display ALC circuit is disabled Multiple error messages occur, only the most recent messageCan be viewed by pressing Utility Error Info This annunciator appears when a sweep has been initiated View and delete error messages using the Utility menu Series Signal GeneratorsThis annunciator appears when an error message is placed Modulations that you have enabled are modulating the RF Generated a service request SRQ over the Gpib RF signal is present at the RF Output connectorS annunciator appears when the signal generator has List or step mode Rear Panel Timebase or 1 ppm high stability timebase TTL/CMOS high to TTL/CMOS low edge trigger. With Option UN8 Output signals for this connectorOption 201 this connector is used for system reset output Second output is generated every two seconds indicating Connector is present only on instruments with Option UN7 Q OUT connector outputs the analog, quadrature-phaseBER Meas END connector outputs a signal that indicates BER Sync Loss connector outputs a signal that indicates Exploring the User Interface