Agilent Technologies FS2010 user manual

Signal Naming

Conventions

Determining which logic analyzer card is the Master

This operating manual uses the same signal notation as the PCI-X LOCAL BUS SPECIFICATION - REVISION 1.0 That is, a # symbol at the end of a signal name indicates that the signal’s active state occurs when it is at a low voltage. The absence of a # symbol indicates that the signal is active at a high voltage.

When connecting the logic analyzer cards to the FS2010 it is necessary to know which logic analyzer card in which slot has been configured as the Master and which one has been configured as the Expander. Refer to the SYSTEM view of your 1670x or 1690x mainframe to determine how the cards have been configured.

8