Agilent Technologies U2802A manual N O Te

Getting Started 1

i. If Agilent IO Libraries Suite version 14.1 or lower has been pre-installed

If you have Agilent IO Libraries Suite version 14.1 or lower installed on your PC, you are required to uninstall the IO Libraries Suite.

1To perform uninstallation, go to Start > Control Panel > Add or Remove Programs. The Add or Remove Programs window will appear. Select Agilent IO Libraries Suite 14.1 or lower version.

2Click Change/Remove and select Remove when the instructions on the screen prompted to proceed uninstalling the IO Libraries Suite version 14.1 or lower from your PC.

3Proceed to C. Install the Agilent IO Libraries Suite Version 14.2 or Higher.

ii.If Agilent IO Libraries Suite 14.2 has been pre-installed

If you have the IO Libraries Suite 14.2 pre- installed on your PC, skip Step

Cand proceed to D. Install the DAQ Hardware Driver.

iii. If Agilent IO Libraries Suite is not installed

If you do not have IO Libraries Suite installed on your PC, go to C. Install

the Agilent IO Libraries Suite Version 14.2 or Higher.

C. Install the Agilent IO Libraries Suite Version 14.2 or Higher

The Agilent IO Libraries Suite 14.2 is available in the Agilent Automation- Ready CD that comes with the standard purchase of Agilent U2300A Series USB Multifunction Data Acquisition Devices or U2802A 31- Channel Thermocouple Input.

N O TE

•If you do not have the Agilent Automation-Ready CD, obtain the Agilent IO Libraries Suite 14.2 or higher at http://www.agilent.com/find/iolib.

•Ensure that you do not have any USB DAQ device connected to your PC during installation of the Agilent IO Libraries Suite.

Agilent U2802A 31-Channel Thermocouple Input User’s Guide 11