Getting Started | 1 |
F. Connect Your DAQ Device to the PC
N O TE | Refer to Agilent U2300A Series USB MultifunctionData Acquisition Devices User’s Guide | |
for “Connect Your DAQ Device to PC” procedure. | ||
| ||
| During DAQ connectivity, the bundled power supply splitter in U2802A is used to supply | |
| power for both U2802A and U2355/56A DAQ, replacing the power supply cable. | |
|
|
G. Hardware Verification
N O TE | Refer to Agilent U2300A Series USB MultifunctionData Acquisition Devices User’s Guide | |
for “Hardware Verification” procedure. | ||
| ||
|
|
H. Connect Your U2802A to DAQ
1Connect U2802A to U2355/56A DAQ using two 68- pin SCSI cables.
2Connect 12 VDC power supply to the power jack on the rear panel of the U2802A and the U2355/56A DAQ with the bundled power supply splitter.
3Power on U2355A or U2356A DAQ.
Agilent U2802A | 17 |
