Aiko CTH3-150, CTH3-80, CTH3-200, CTH3-115 service manual Description Part Number

CTH3-SERIES INSTALLATION, OPERATION AND SERVICE MANUAL

FIGURE 30: Modulating Thermostat Wiring Diagram (LonWorks® [2-10Vdc with 500 Ohm resistor] optional)

NOTE: 1. For non-communicating thermostats without LonWorks® bus, thermostat terminals marked "EB" will be marked "_____" and no LonWorks® bus communication wires are used.

* Separate on/off switch is optional for "satellite" heaters (install at user level).

On/Off switch is used to disable heater operation or reset a heater that is in "lockout" mode. If on/off switch is not desired, leave jumper wire between R and W terminals in place.

Description	Part Number
Thermostat, modulating	90425105
Thermostat, modulating LonWorks®	90425104

50 of 71