| addresses listed in filtering table will be denied from connecting to | |
| the network; if you select allow, only IP addresses listed in filtering | |
| table will be able to connect to the network, and rejecting all other | |
| network devices. | |
IP Filtering | All existing IP addresses in filtering table will be | |
Table (12): | listed here. | |
Add PC (13): | Click this button to add a new IP address to IP filtering table, up to | |
| 20 IP addresses can be added. | |
| Please refer to section | |
Delete | If you want to delete a specific IP address entry, | |
Selected (14): | check the ‘select’ box of the IP address you want to delete, then | |
| click ‘Delete Selected’ button. (You can select more than one IP | |
| addresses). | |
Delete All (15): | If you want to delete all IP addresses listed here, please click | |
| ‘Delete All’ button. |
|
After you finish with all settings, please click ‘Apply’ (16) button and the following message will be displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on other setup procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait for about 30 seconds while router is rebooting).
If you want to reset all settings in this page back to
95
