If you want to go back to previous step, please press ‘Back’ button on the bottom of this page.
NOTE: Some service providers use ‘DHCP’ (Dynamic Host Configuration Protocol) to assign IP address to you. In this case, you can choose ‘Cable Modem’ as Internet connection type, even you’re using another connection type, like xDSL. Also, some cable modem uses PPPoE, so you can choose ‘PPPoE xDSL’ for such cable modem connection, even you’re using a cable modem.
3. Basic Setting
1
2
3
4
5
6
Here are descriptions of every setup items:
Wireless Module (1): Display the Wireless Module: Enable (default).
Band (2):Please select a Band type from the dropdown list of ‘Band’, It allows you to set the AP fix at 802.11b or 802.11g or 802.11n mode. You also can select B+G or B+G+N mode to allow the AP select 802.11b, 802.11g and 802.11n connection automatically.
17
