Comment (6): | The description of this setting. |
Popula Applications | This section lists the more popular applications that (7): |
require multiple connections. Select an application
from the Popular Applications selection and click ‘Add’ to save the setting to ‘Current
Add (8): | Add the setting to the ‘Current |
|
|
Reset (9): | Click ‘Reset’ will clear all above setting and you can set up again. | ||
Current Trigger | All the settings for the special applications will be |
|
|
listed here. If you want to remove some Special Application | |||
| settings from the " Current | ||
| Application settings you want to remove in the table and then click | ||
| "Delete Selected". If you want remove all Special Appliacation | ||
| settings from the table, just click "Delete All" button. Click "Reset" | ||
| will clear your current selections. |
|
|
Delete (11): | Please select a special application by clicking | the ‘Select’ | |
| box of the mapping, then click ‘Delete Selected’ button to remove | ||
| the setting. If there’s no setting here, this button will be grayed | ||
| out. |
|
|
Delete All (12): | Delete all settings existed in trigger port table. |
|
|
Reset (13): | Unselect all settings. |
|
|
Note: Only one LAN client can use a particular special application at a time.
After you finish with all settings, please click ‘Apply’ (14) button and the following message will be displayed on your web browser:
88
