wireless router is properly set, you’ll see ‘Configured’ message here. If wireless security function has not been set, you’ll see ‘unConfigured’.
Self PIN code: This is the WPS PIN code of this wireless router.
This code is useful when you need to build wireless connection by WPS with other
SSID: The SSID of this wireless router will be displayed here.
Authentication Mode: The wireless security authentication mode of this wireless router will be displayed here. If you don’t enable security function of the wireless router before WPS is activated, the router will auto set the security to WPA (AES) and generate a set of passphrase key for WPS connection.
Passphrase Key: The wireless security key of the router will be displayed here.
Config Mode (3): There are ‘Registrar’ and ‘Enrollee’ modes for the WPS connection. When ‘Registrar’ is enabled, the wireless clients will follow the router’s wireless settings for WPS connection. When ‘Enrolle’ mode is enabled, the router will follow the wireless settings of wireless client for WPS connection.
ConfigureClick ‘Start PBC’ to start
by Push Button (4): setup procedure. This wireless router will wait for WPS requests
| from wireless clients for 2 minutes. The ‘WLAN’ LED on the | |
| wireless router will be steady on for 2 minutes when this wireless | |
| router is waiting for incoming WPS request. | |
Configure | Please input the PIN code of the wireless client you | |
by Client | wish to connect, and click ‘Start PIN’ button. | |
PinCode (5): | The ‘WLAN’ LED on the wireless router will be steady on when | |
| this wireless router is waiting for incoming WPS request. | |
|
|
|
74
