Here are descriptions of every setup items:
Enable Port | Check this box to enable port mapping, |
Forwarding (1): | and uncheck this box to disable port mapping. |
Private IP (2):Input the IP address of the computer on local network which provides internet service.
Computer Name (3): Pull down the menu and all the computers connected to the router will be listed here. You can easily to select the computer name without checking the IP address of the computer.
Type (4): | Select the type of connection, TCP or UDP. If you’re not sure, | |
| please select ‘Both’. |
|
Port Range (5): | Input the starting port number in the left field, and input the ending | |
| port number in the right field. If you only want to redirect a single | |
| port number, just fill the port number in the left field. | |
Comment (6): | Please input any text to describe this mapping, up to 16 | |
| alphanumerical characters. |
|
Add (7): | Add the mapping to port forwarding table. |
|
Reset (8): | Remove all inputted values. |
|
Port Forwarding | All existing port forwarding mappings will |
|
Table (9): | be displayed here. |
|
Delete (10): | Please select a port forwarding mapping by | clicking the |
‘Select’ box of the mapping, then click ‘Delete Selected’ button to remove the mapping. If there’s no existing mapping, this button will be grayed out.
Delete All (11): Delete all mappings existed in virtual server table.
83
