Airlink101 AWMB100 manual TCP/IP Configuration, Wireless Configuration

System

Uptime	The duration of time the AirLink101 Music
	Bridge has been servicing the network.
Firmware Version	The version of the firmware installed on your
	AirLink101 Music Bridge device.
Wireless Configuration
Mode	There are two modes supported: Access Point
	and Client
Band	Shows the wireless band that is being used.
SSID	The SSID differentiates wireless networks from
	each other. Therefore, all access points and
	devices attempting to connect to a network
	must use the same SSID. It is case-sensitive
	and must not exceed 32 characters. A device
	will not be permitted to join the network unless
	it can provide the unique SSID. The SSID is
	also referred to as a “network name”.
Channel Number	The number of channels supported depends on
	the where in the world you are using the
	AirLink101 Music Bridge. All stations
	communicating with the Access Point must use
	the same channel.
Encryption	Encryption (Wired Equivalent Privacy) is set to
	Disabled by default. When WPA, WPA2, or
	WEP are enabled, data is encrypted before
	being transmitted onto the network. This
	prevents data packets from being
	eavesdropped by attackers and snoopers. By
	using encryption, there may be a reduction of
	data throughput on the wireless link.
BSSID	BSSID displays the ID of the current Basic
	Service Set (BSS), which uniquely identifies
	each network. If AirLink101 Music Bridge is in
	AP mode, this value is its MAC address.
Associated Clients	Displays the total number of clients associated
	to this device. You can have up to 64 clients
	associating to a device at once.
TCP/IP Configuration
Attain IP Protocol	Displays how the AirLink101 Music Bridge
	obtained its IP address, either through a Fixed-
	IP or as a DHCP-client.
IP Address	Current IP address for this device
Subnet Mask	Current Subnet mask for this device
Default Gateway	Default Gateway for this device
MAC Address	The MAC Address for this device

27