Airlink101 AWMB100 manual Other Settings, System Log

IP Address, Subnet		These fields can only be modified when DHCP
Mask, Default		Client mode is disabled. If you are connecting
Gateway		to an existing network and are unsure what to
		enter here, ask the person that set up your
		network to provide these values for you.
DHCP		DHCP can be used to automatically configure
		your network addresses. Select Disable,
		Client or Server from the pull-down menu.
		Disable: Don’t use DHCP
		Client: Automatically obtain a network
		address. You must have a DHCP server on
		the network for this to work.
		Server: The AirLink101 Music Bridge will act
		as a DHCP server, providing network
		addresses to other devices on the network.
DHCP Client		Select the range of network addresses to
Range		be allocated.
Show Client		Click to show the current DHCP Client
		table.
DNS Server		Enter the IP address of the machine to
		handle your Domain Name Service
		requests.
802.1d	Enabling an 802.1d Spanning Tree will prevent
Spanning	the network from creating infinite loops. Infinite
Tree	loops can happen in the network when WDS is
	enabled and there are multiple active paths
	between stations.
Clone MAC	You can specify the MAC address of your
Address	Access Point, replacing the factory setting.
Apply Change	Click this button to save your changes.
Reset	Click this button to discard your changes.

5.5 Other Settings

5.5.1 System Log

This page displays a list of recent events on the network. A network administrator can use the system log to trace problems.

38