Wireless Access | Select the Access Control Mode from the |
Control Mode | |
| Disable: Select to disable Wireless Access |
| Control Mode. |
| Allow Listed: Only the stations shown in the |
| table can associate with the AP. |
| Deny Listed: Stations shown in the table |
| won’t be able to associate with the AP. |
MAC Address | Enter the MAC Address of a station that is |
| allowed to access this Access Point. |
Comment | You may enter up to 20 characters to help |
| you describe the device whose MAC address |
| you have entered. |
Apply Changes | Click to save your new settings. |
Reset | Click to discard the data you have entered. |
Current Access | Click to show the current access control list. |
Control List |
|
Delete Selected | To delete clients from your Access Control |
| List, check the Select checkbox next to the |
| MAC address, and click Delete Selected. |
Delete All | To delete all the clients from your Access |
| Control List, click Delete All. |
Reset | If you have made any selections, clicking |
| Reset will clear all of your selections. |
36
