A
B
HOLD 
14
Connecting the headphones → A
Connect the supplied headphones to the remote control and connect the remote control to the OUTPUT jack of the main unit.
HOLD switches → B
When operating with the main unit,
release HOLD on the main unit. → a
When operating with the remote control,
release HOLD on the remote control. → b When not using the unit, set both to the HOLD position. → c
Accidentally pressed buttons will not function.
If buttons on the main unit are pressed when the HOLD switch is set to the HOLD position, “HOLD” appears.
If the unit fails to perform as described in these Operating Instructions, check the following guide.
Power does not turn on.
•Connect the AC adaptor firmly.
•Insert the batteries correctly.
•Recharge the rechargeable battery.
Operation does not start.
•Close the disc holder completely.
•Insert a disc.
•Release the HOLD switch.
•Connect the remote control completely.
Erroneous display/operation occur.
•Reset the unit by pressing the RESET button on the bottom of the unit.
The sound noisy.
•If the unit is close to a magnetic object, keep the unit further away from it.
Sound mutes.
•Place the unit on a stable surface with no vibration.
Cannot record or edit.
•Release the HOLD switch.
•Connect the unit firmly.
•Use a recordable disc.
•Slide the
Sound cannot be heard from the headphones.
•Connect the headphones firmly.
Recording date is not registered correctly.
•Set the clock again.
•Recharge the rechargeable battery.
English
71
14 | 28/4/2000, 6:06 PM | |
|
|
|