This unit is equipped with the Dolby Pro Logic decoder, Dolby Digital decoder and DTS decorder.
The unit and the center and surround speakers (standard) assure
Independent control of the five channels allows the listener to enjoy the same type of sound reproduction experienced in movie theaters. Voices are reproduced in the front and center sound field, while ambient sounds like cars and crowds are reproduced on all sides of the listener for an incredibly lifelike audio/video experience. Please read the following carefully to “tune” the system’s output to match the characteristics of your listening space.
Check the following:
•Before enjoying the DOLBY surround sound or DTS surround sound, adjust the speaker sound levels to the proper balance (see page 16).
•Make sure the speakers are properly connected and positioned (see pages 4 and 5).
•Make sure the TV set and video unit are properly connected (see page 3).
•Make sure the disc and video tape, etc., support Dolby Pro Logic, Dolby Digital surround or DTS surround.
Preparations
•When selecting a Dolby Digital Surround mode, select the VIDEO 1 (DIGITAL), VIDEO 2 (DIGITAL) or VIDEO 3 (DIGITAL) function (see page 12) and play a disc recorded in Dolby Digital Surround before selecting the mode.
•When selecting a Dolby Pro Logic mode, select the function except CD(DIGITAL), VIDEO 1 (DIGITAL), VIDEO 2 (DIGITAL) and VIDEO 3 (DIGITAL).
1 Press the SURROUND button and turn the MULTI JOG to select the appropriate mode.
The selected mode name appears on the display.
[Dolby Digital surround]
The optimal Dolby Digital surround and Dolby Pro Logic modes and settings depend on the type and placement of the speakers. It is recommended that the optional AIWA speakers should be used for all channels, for example, the
Check the current type and placement of your speakers and select the recommended mode accordingly.
The recommended mode
[Dolby Digital surround]
|
| Center speaker |
| |
|
|
|
| |
| No speaker | |||
|
|
|
| |
Surround speaker | DOLBY | DOLBY | PHANTOM | |
(Rear speaker) |
| |||
|
|
|
| |
No surround | 3 STEREO- | 3 STEREO- | 2chSTEREO | |
speaker | WIDE | NORMAL | ||
| ||||
|
|
|
|
[Dolby Pro Logic]
|
| Center speaker |
| |
|
|
|
| |
| No speaker | |||
|
|
|
| |
Surround speaker | PRO LOGIC- | PRO LOGIC- | PHANTOM | |
(Rear speaker) | WIDE | NORMAL |
| |
|
|
|
| |
No surround | 3 STEREO- | 3 STEREO- | – | |
speaker | WIDE | NORMAL | ||
| ||||
|
|
|
|
PHANTOM mode: Select this mode when the center speaker is not connected. All center channel signals are redistributed to the left and right channel speakers.
3 STEREO mode: Select this mode when the surround speakers are not connected.
DOLBY D PHANTOM 3 STEREO
To select the 2chSTEREO mode, press the SURROUND button repeatedly until “2chSTEREO” appears.
NOTE
Select the Dolby Digital Surround mode while playing a source recorded in Dolby Digital Surround.
[Dolby Pro Logic]
PRO LOGIC PHANTOM 3 STEREO
2Press the SURROUND button again and hold it down until the center speaker mode to be selected appears. (Except the 2chSTEREO and
“NORMAL” and “WIDE” appear one after the other.
When operating with the remote control
Press the SURROUND button repeatedly to select the mode, and hold it down to select the center speaker mode.
15 ENGLISH