Position the speakers to make the most of DOLBY SURROUND, DTS SURROUND or DSP surround effect.
Center speaker (C)
Position in the center of the two front speakers. In addition, position on or below the TV set, if connecting a TV set to the unit.
Place the surround speakers directly to the side of or slightly behind the listening area. Align them horizontally, about 1 meter (3.2 feet) above ear height.
Place the sub woofer in any place between the two front speakers.
Select “SUBW ON” mode.
1.Press the MANUAL SELECT button on the remote control once so that “SUBW OFF” appears on the display.
2.Within 4 seconds, press the TUNING M(DOWN) button or turn the MULTI JOG to the left to display “SUBW ON.”
If a sub woofer is not connected, be sure to select “SUBW OFF.”
Display “SUBW ON” in step 1 and press the TUNING N (UP) button or turn the MULTI JOG to the right in step 2.
NOTE
Sound from the surround speakers or center speaker depends on the setting of DOLBY SURROUND, DTS SURROUND or DSP surround.
The unit is equipped with AC outlets.You can use them once the unit is connected to an AC outlet on a wall.
SWITCHED: Electric current flows through it when the unit is turned on.
UNSWITCHED: Electric current always flows through it.
Do not connect equipment beyond their capacity (120 W, 1 A MAX. and TOTAL)
Connect the FM antenna to the FM 75 Ω terminals and the AM antenna to the AM LOOP terminals.
FM antenna
AM antenna
Fix the claw to the slot as shown in the illustration.
Extend this antenna horizontally in a T shape and fix its ends to the wall.
Position for the best reception.
NOTE
•Do not bring the FM antenna near metal objects or curtain rails.
•Do not bring the AM antenna near other external equipment, the unit itself, the AC power cord or speaker cords, as noise will be picked up.
•Do not unwind the AM loop antenna wire.
For better FM reception, use of an outdoor antenna is recommended. Connect the outdoor antenna to the FM 75 Ω terminals.