Aiwa XD-DV370 operating instructions Connections

CONNECTIONS (CONTINUED)

B Connecting to a TV set and an amplifier with a Digital In jack

Use either the commercially available optical cord or 75 ohm coaxial cord when connecting this unit to an AV amplifier with a Digital In jack. The supplied video cord is also available instead of the coaxial cord.

TV set

to 21 pin scart connector

21 pin scart cable (not supplied)

to 21 pin scart
connector	Rear of the unit

DIGITAL

OUT

OPTICAL

DIGITAL OUT	AUDIO
	OUT
COAXIAL	L
S-VIDEO
	R
	NTSC
	PAL AUTO
OUT	VIDEO
	OUT

to DIGITAL OUT	to DIGITAL OUT
OPTICAL jack	COAXIAL jack
	or Coaxial cord	to an AC power socket
Optical cord (not supplied)	(not supplied)	(AC 230 V, 50 Hz)
	to a digital input jack

Front	Amplifier with a Digital In jack	Front speaker
speaker (L)		(R)

When your TV set is equipped with an S-video input terminal, see page 17.

Set the setup menu correctly after connecting!

According to the audio equipment and TV set to which the unit is connected, set the “Digital Audio Output” and “TV Aspect” of the setup menu correctly referring to the following below.

See “CHANGING SETUP VALUE” on page 39 in detail.

Digital Audio Output

PCM

TV Aspect

When your TV set is a conventional-screen size TV: 4:3 Letter box

When your TV set is a wide-screen size TV: 16:9 Wide

NOTE

When the picture noise appears while copy-protected DVDs are played, connect the unit directly to a TV set. Do not connect through a VCR, TV/VCR or AV selector.

12