SOUND

AUDIO ADJUSTMENTS

BBE SYSTEM

PREPARATIONS

The BBE system enhances the clarity of high-frequency sound.

It also enriches the Karaoke function to make your voice sound

clear and pleasant.

Press BBE.

Each time it is pressed, the level changes. Select one of the

three levels or the off position to suit your preference.

T-BASS

BBE

PHONES

VOLUME

MANUAL

SELECT

T-BASS

VOL /

f,g

SOUND

NOTE

When playing back a tape recorded with BBE, it is recommended that BBE be set to off to avoid distorted high frequency sound.

VOLUME CONTROL

Turn VOLUME on the main unit, or press VOL N or M on the remote control.

The volume level is displayed as a number from 0 to MAX (50). The volume level is automatically set to 20 when the power is turned off with the volume level set to 21 or more.

To change the left/right balance

Press MANUAL SELECT on the remote control. L/R is displayed for 2 seconds. Press f or g on the remote control within these 2 seconds.

The DOLBY PRO LOGIC (page 24) and the DOLBY DIGITAL SURROUND (page 25) front speakers level is also changed.

Using the headphones

Connect headphones to PHONES jack with a stereo standard plug (ø 6.3 mm, 1/4 inch).

No sound is output from the speakers while the headphones are plugged in.

When the headphones are plugged in, the DSP SURROUND system (page 13), the DOLBY PRO LOGIC (page 24) and the 5.1CH (page 25) do not function.

SUPER T-BASS SYSTEM

The T-BASS system enhances the realism of low-frequency sound.

Press T-BASS.

Each time it is pressed, the level changes. Select one of the three levels or the off position to suit your preference.

En

NOTE

Low-frequency sound may be distorted when the T-BASS system is used for a disc or tape in which low-frequency sound is already emphasized. In this case, cancel the T-BASS system.

ENGLISH 11

Page 12
Image 12
Aiwa XH-A1000 manual Audio Adjustments, BBE System, Volume Control, Super T-BASS System