Aiwa XH-A1000 Adjusting Speaker Level, 1Press DOLBY PRO LOGIC to select NORMAL, Dolby, Manual

NOTE

•Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.

•Up to 30 tracks can be programmed from any of the inserted discs.

•“FULL” is displayed if you attempt to program more than 30 tracks.

About cassette tapes

•To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool.

Side A

Type II tape	Tab for side A
detection
slot

To record on the tape again, cover the tab openings with adhesive tape, etc. (On Type II tapes, take care not to cover the Type II tape detection slot.)

•120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recommended.

•Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the mechanism.

DOLBY SURROUND	RECORDING
The DOLBY PRO LOGIC feature and the center and surround
speakers (standard) assure full-scale home theater sound. When
playing back laser discs or video software that have been
recorded in Dolby Surround, astonishingly realistic sound
surrounds the listener to create a new level of audio/visual
entertainment.
Independent control of the five sound channels allows the listener
to enjoy the same type of sound reproduction experienced in	SURROUND
movie theaters. Voices are reproduced in the front and center
sound field, while ambient sounds like cars and crowds are
reproduced on all sides of the listener for an incredibly lifelike
audio/video experience. Please read the following carefully to
“tune” the system’s output to match the characteristics of your
listening space.	DOLBY
Check the following:
• Before using the DOLBY PRO LOGIC, adjust the proper
balance of speaker sound levels.
• Make sure the supplied speakers are properly connected and
positioned (see page 5).
• Make sure the TV set and video unit are properly connected
(see page 7).
• Make sure the laser disc, video tape, etc., suppor t
H.

ADJUSTING SPEAKER LEVEL

	En
	MANUAL
DOLBY	SELECT
	h
PRO
LOGIC	PRO LOGIC

f,g f,g

DOLBY NR system

The Dolby Noise Reduction system reduces tape hiss noise. For optimum performance when playing back a tape recorded with the DOLBY NR system, turn on the DOLBY NR system.

The unit is equipped with a built-in test signal generator called a noise sequencer for easy balance adjustment of all 5 channels. The sequencer outputs a noise signal that “travels” from channel to channel, enabling the simple adjustment of sound level to achieve, at the listening position, the same apparent loudness from each channel.

1Press DOLBY PRO LOGIC to select NORMAL.

“NORMAL” is displayed.

If “PHANTOM” or “3 STEREO” is displayed, press DOLBY PRO LOGIC repeatedly until “NORMAL” is selected.

ENGLISH 23