Aiwa XM-M25 manual 3,74,5, Press EDIT/CHECK twice while pressing SHIFT button, Repeat step

3,74,5

SHIFT

8

2

In the programmed edit recording function, the track can be programmed while checking the remaining time on each side of the tape as the tracks are programmed.

m

The programmed edit recording will not starl from a point halfway in the tape. The tape must be recorded on from the beginning of either side.

Use the remote control from step 2 to 8.

1 Insert the tape into deck.

Insert the tape with the side to be recorded on first facing out from the unit.

2 Press FUNCTION repeatedly until “CD” is displayed and load the disc.

3 Press EDIT/CHECK twice while pressing SHIFT button.

“EDIT”lights up and “PRGM”flashes on the display.

PRGM

EDIT

4Press numbered buttons O-9 to designate the tape length.

10 to 99 minutes can be specified.

Examp/e: When using a 60-minute tape, press 6 and O.

●The + and > are also available to designate the tape length.

	Maximum recording
Tape length	time for side A

Tape side A (front side)

5 Press the numbered buttons O-9 and +10 to program a track.

Examp/e To select the 10th track, press +1O and O.

6 Repeat step	5 for the rest of the tracks ‘for side A.	d$
		,j	?,,,
A track whose	playing time is longer than the remaining time	{~	~,
cannot be programmed.		,*J+&
		,~”. &:.
		:,:*}	w,,

Selected Program

tracks number

1I

7 Press EDIT/CHECK while pressing SHIFT to select side B and program the tracks for side B.

After confirming “Bon the display, repeat step 5.

Tape side B (reverse side)

8 Press ● TAPE REC/REC MUTE and then press

-within 2 seconds to start recording,,

The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and recording starts. When recording on the front (side A) ends, recording on the back (side B) starts.

To stop recording

Press ■ . Recording and CD play stop simultaneously.

To check the order of the programmed track numbers

Before recording, press EDIWCHECK while pressing SHIFT to

select side A or B, and press < or - repeatedly.

Program Programmed

Track number number track numbers

Tape side

To change the program of each side

Press EDiT/CHECK while pressing SHIFT to select side A or B, and press W CLEAR to clear the program on the selected side. Then program tracks again.

To clear the edit program

Press W CLEAR twice so that “EDIT”disappears on the display.

Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.

ENGLKH 14