Aiwa XM-M25 Using the remote control, To use Function on the remote control, To cancel Demo mode

Inserting batteries

Detach the battery cover on the rear of the remote control and insert two size AA (R6) batteries.

AA”(R6)

When to replace the batteries

The maximum operational distance between the remote control and the sensor on the main unit should be approximately 5 meters (16 feet). When this distance decreases, replace the batteries with new ones.

Using the remote control

The instructions in this manual refer mainly to the buttons on the main unit. Buttons on the remote control with the same names as those on the main unit can be used as well.

To use SHIFT on the remote control

Buttons @ have two different functions. One of these functions is indicated on the button, and the other on the plate above the button.

To use the function on the button, simply press the button.

To use the function on the date above the button, press the button while pressing SHIFT.

To use FUNCTION on the remote control

The FUNCTION substitutes for the function buttons (TAPE, TUNER, AU)UVIDEO, CD) on the main unit.

Each time FUNCTION is pressed while power is on, the next function is selected cyclically.

P PRESET on the remote control

The function is the same as that of+ ➤ on the main unit.

@

SHIFT

P PRESET

FUNCTION

POWER

Function

Remotebuttons sensor

DEMO

PHONES

To turn the unit on

Press one of the function buttons (TAPE, TUNER, AWUVIDEO, CD). Playback of the inserted disc or tape begins, or the previously tuned station is received (Direct Play Function).

POWER is also available.

To turn the power off

Press POWER.

DEMO (Demonstration) mode

When the AC cord is connected, the display window demonstrates the functions of the unit. When the power is turned on, the DEMO display is overridden by the operation display. When the power is turned off, the DEMO mode is restored.

To cancel DEMO mode

Press DEMO. The clock display appears. (To set the current time, see “SETTINGTHE CLOCK on page 16.) To re-activate the DEMO mode, press DEMO again.

Using the headphones

Connectthe headphones to PHONES jack with a stereo mini plug (a3.5 mm, ‘/8 inch).

No sound is output from the speakers while the headphones are plugged in.

m

●If the remote control is not going to be used for an extended period of time, remove the batteries to prevent possible electrolyte leakage.

●The remote control may not operate correctly when:

-The line of sight between the remote control and the remote sensor beside TAPE is exposed to intense light, such as direct sunlight

-Other remote controls are used nearby (those of a television, etc. )

5 ENGLISH