Aiwa XM-M25 manual Tapei REV Mode ~ Eject, To select a reverse mode

TAPEI

REV MODE

- 4F

II

- ~ EJECT

■

,@m-,-..*em*-*

INSERTING A TAPE

●You can select a reverse mode to playback one or both sides.

●Use Type I (normal), Type II (high/CrOz) or Type IV (metal) tapes for playback.

Press TAPE/REV MODE and press A EJECT mark

to open the cassette holder

Insert a tape with the exposed side down. Push the cassette holder to close.

To select a reverse mode

Each time TAPE/REV MODE is pressed, the reverse mode changes.

1)— CI)

r’– 1

To play one side only, select =.

To play from front side to back side once only, select =). To play both sides repeatedly, select C=).

The tape counter indicates the tape running length

F: The front side is being played (forward).

4 : The back side is being played (reverse),

To stop play, press ■ .

To pause play, press 11. To resume play, press again.

To change the playback side, press 4 ➤ DIR/PRESET in play or pause mode.

To fast forward or rewind, press U or - in stop mode. Then press ■ to stop the tape.

To start play when the power is off (Direct Play Function) Press TAPE. The power is turned on and play of the inserted tape begins.

To set the tape counter to 0000 Press ■ CLEAR in stop mode.

The counter is also set to 0000 when the cassette holder is opened.

\

About cassette tapes

●To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool.

,~;Q<@

Side A		Tab for side A
	@	1P

To record on the tape again, cover the tab openings with adhesive tape, etc.

●120-minute or longer tapes are extremely thin and easily

deformed or damaged. They are not recommended.

. Take up any slack in the tape with a pencil or similar tool

before use. Slack tape may break or jam in the mechanism.

/

I 1 ENGLISH