EDIT PROGRAM - SINGLE
Page 114 CD3000XL OperatorÕs Manual
THE TONE PAGE
If the IB304F is fitted, the CD3000XL also features a simple tone control which is accessed via
F8 - . Pressing this will display this screen:
The TONE section can best be described as ‘spectral tilt’. If you imagine a see-saw, the bench
is the parameter and the fulcrum over which it rocks is the
parameter. For example, when the controls are set as shown in the above screen diagram, the
response would be flat but with a setting of 50 for the centre frequency parameter and +50 for
the slope parameter, you would have a response graph something like this:
L
E
V
E
L
FREQUENCY
+
-
CENTRE FREQUENCY
CENTRE FREQUENCY=50 SLOPE=+50
Here, bass frequencies are attenuated whilst high frequencies are boosted. Setting the
parameter to -50 would reverse the angle, cutting high frequencies and boosting LF.
By setting the lower, you may create a tone response something like
this:
L
E
V
E
L
FREQUENCY
+
-
CENTRE FREQUENCY
CENTRE FREQUENCY=25 SLOPE=+50
Here, some bass frequencies are cut but some mid and a lot of high frequencies are boosted.