Akai CD3000XL - page 301

FLASHROM
CD3000XL OperatorÕs Manual Page 285
SAVING DATA TO THE FLASHROM
Saving data to FlashROM is virtually identical to saving data to disk and is done in the SAVE
mode.
Pressing SAVE on CD3000XL will show something like this screen:
As well as the usual FLOPPY or HARD-: options normally available at the top centre of the
screen, you may also choose FLASH thus:
As with a hard disk, the FlashROM is divided into ‘volumes’ and there are 100 volumes you can
use, selected in the VOL: field to the right of the FLASH selection. Each volume can hold as
much data as you like. For example, you could have lots of volumes with small amounts of data
in each volume or you could save a full 8Mbytes to just one volume.