APPENDIX 3
CD3000XL OperatorÕs Manual Page 295
CAUTION - These servicing instructions are for use by qualified personnel
only. To reduce the risk of electric shock, do not perform any of servicing
other than that contained in the Operating instructions unless you are
qualified to do so. Refer all servicing to qualified service personnel.
INSTALLING THE OPTIONS—TO SERVICE TECHNICIANS
The CD3000XL can accommodate several options. These are the IB-304F bank of second
filters and third envelope generator, the EB16 multi-effects processor and memory expansion.
These can be fitted by yourself if you feel confident to do so. To install any of these options,
you must remove the top of the case.
** IMPORTANT NOTE **
Consult your AKAI Professional dealer on installation of any options
(including memory) to the CD3000XL. Self-servicing may cause malfunction
of components or the instrument itself. Akai does not guarantee against the
unit’s malfunction, damage or any loss caused by self-servicing or improper
operation.
Remove the top of the case by undoing the two large screws either side of the case and the
smaller screw in the centre of the top of the rear panel. Looking inside the CD3000XL, you will
see something like this: