▲!
1.1 Safety
1 Safety and Environment
1.Do not spill any liquids on the charger. This may cause short circuits and contaminate the charging contacts.
2.If any liquid penetrates into the charging receptacle, disconnect the charger from power immediately and have the charger checked by AKG service personnel.
3.Never use the charger to charge dry batteries. The charger will detect dry batteries and automatically deactivate the charging function.
4.Use the charger in dry rooms only.
5.The charger may be opened, serviced, and repaired by authorized personnel only. The charger contains no
6.Place the charger at least 1 inch away from walls or other equipment to ensure adequate heat dissipation from the charger. If the charger overheats, the charging cycle will be stopped immediately.
7.Before connecting the charger to power, check that the AC mains voltage stated on the included power supply is identical to the AC mains voltage available where you will use the charger.
8.Do not operate the charger with any power supply other than the included local power supply or the optional PSU 4000 central power supply from AKG with an output voltage of 12 VDC. Using a power supply with an AC output and/or a different output voltage may cause serious damage to the charger.
9.If you will not use the charger for a long period of time, disconnect the charger from power. To prevent unwanted discharging, be sure to remove the transmitter(s)/receiver(s) and/or BP 4000 Battery Pack(s) from the charger every time you disconnect the charger from power.
10.Do not place the charger near heat sources such as radiators, heating ducts, or ampli-
fiers, etc. and do not expose it to direct sunlight, excessive dust, moisture, rain, me - chanical vibrations, or shock.
11.Clean the charger with a moistened (not wet) cloth only. Be sure to disconnect the charger from power before cleaning the charger! Never use caustic or scouring clean - ers or cleaning agents containing alcohol or solvents since these may damage the enamel and plastic parts.
12.Use the charger for the applications described in this manual only. AKG cannot accept any liability for damages resulting from improper handling or misuse.
1.2Environment 1. The charger will draw a low current even when the charging mode is off. To save energy, disconnect the charger from power if you will not use the charger for a long period of time. To prevent unwanted discharging, be sure to remove the transmitter(s)/receiver(s) and/or BP 4000 Battery Pack(s) from the charger every time you disconnect the charger from power.
2.Be sure to dispose of used batteries as required by local waste disposal rules. Never throw batteries into a fire (risk of explosion) or garbage can.
3.When scrapping the charger, separate the case, circuit boards, and cables, and dispose of all components in accordance with local waste disposal rules.
4.The packaging of the charger is recyclabe. To dispose of the packaging, make sure to use a collection/recycling system provided for that purpose and observe local legislation relating to waste disposal and recycling.
16 | CU 4000 |
