Alamo 284, 272 manual GEARBOX Model 260, Tail Wheel Assembly, Maintenance

MAINTENANCE

MAINTENANCE

GEARBOX (Model 260 & 284)

The gearbox should be full (3 quarts) and not require additional lubricant unless the box is cracked or a seal is leaking. It is recommended that the oil level dipstick (Figure MntP-R-0056)be removed to check oil level after every 8 hours of operation. If required, oil should be added until it comes to proper level.

Recommended lubricant is Multi-Purpose Gear Oil P/N 00786250.

NOTE: Make sure mower is level when checking oil in the gearbox.

Gearbox capacity is 3 quarts.

NOTE: Overfilling of Gearbox will cause pressure to build up and cause Grease Seals to leak.

GEARBOX (Model 272)

Follow the same instructions as listed above for (Figure Op-1225)

TAIL WHEEL ASSEMBLY

Tail Wheel Bearings are packed at the factory with heavy-duty bearing grease. Grease Fittings are provided in the Wheel Hub and Tail Wheel Beam. Grease after 10 hours of use. Figure Mnt-0004.

260/272/284 01/11 Maintenance Section 5-6

©2011 Alamo Group