OPERATION

TROUBLE

POSSIBLE CAUSE

POSSIBLE REMEDY

 

 

 

Discharging Bunches

Blades dull.

Check blades for sharpness.

 

Grass too wet.

Wait for grass to dry.

 

Grass too long.

Mow at 3-1/2” and recut lower.

 

Travel speed too fast.

Use a lower tractor gear.

 

PTO speed too low.

Mow at engine RPM to match 540

 

PTO speed.

 

 

 

Blades Scalping High Places

Mowing too low.

Raise height of cut.

 

Rough, uneven ground.

Use a slower speed.

 

Turning Tractor too fast.

Slow down when turning.

 

 

 

Uneven Cut

Travel speed too fast.

Use a slower speed.

 

Mower deck not level.

Level the mowing deck.

 

Blades dull or unbalanced.

Sharpen or balance blades.

 

Deck underside plugged.

Clean underside of deck.

 

Grass too high.

Mow at higher setting and recut lower.

 

 

 

Grass Clippings Windrow

Grass too wet.

Wait for grass to dry.

or clump

Grass too high.

Mow at higher setting and recut lower.

 

Housing plugged.

Clean underside of deck.

 

 

 

FACLON 15/10 03/09

Operation Section 4-45

© 2009 Alamo Group Inc.

OPERATION

Page 135
Image 135
Alamo FALCON 15/10 manual Operation