MAINTENANCE

Weld Inspection

The deck and structural members of the Falcon are welded using modern up-to-date equipment. Operating over rough terrain can induce severe stress through out the deck and structural members. All welds should be inspected for any signs of cracks or metal separation. If any welds show these signs they should be repaired at once. Any weld that is not repaired can develop into a severe problem that may bend or deform structural members, and cause severe mower damage. See Image Mnt-R-0242.

Be certain to clamp or securely support the Spindle Housing and sub-assemblies to prevent injuries to hands and feet due to inadvertent dropping or falling over.

Always wear safety glasses and gloves to prevent eye and hand injury when chiselling or hammering on metal components. Hardened metal will chip unexpectedly.

An assembled spindle housing is quite heavy. Use a hoist or get help to handle them safely. Lift carefully and properly using your legs to lift - NOT YOUR BACK.

FALCON 15/10 03/09

Maintenance Section 5-17

© 2009 Alamo Group Inc.

MAINTENANCE

Page 153
Image 153
Alamo FALCON 15/10 manual Weld Inspection