MAINTENANCE
Before operating your Rotary Cutter, make sure it is properly lubricated and thoroughly inspected. Only a minimum of time and effort is required to regularly lubricate and maintain this machine to provide long life and trouble free operation.
Always disengage the PTO before raising the Rotary Cutter for transporting or making adjustments.
Lubrication
Do not let excess grease collect on or around parts, particularly when operating in sandy areas. The accompanying illustration shows lubrication points. The chart gives the frequency of lubrication in hours, based on normal operating conditions. Severe or unusual conditions may require more frequent lubrication. FIGURE
MntP-R-0072.
Use an SAE
Lubrication Fitting Location |
| |
ITEM | DESCRIPTION | FREQUENCY |
1 | Spindle | Weekly |
2. | Axle Turnbuckle | 8 Hours |
3. | Tongue Pivot | 8 Hours |
4. | Wheel Hubs | Weekly |
FALCON 15/10 03/09 | Maintenance Section |
© 2009 Alamo Group Inc.
