OPERATION
OPERATION
11. MOWER STORAGE
Properly preparing and storing the mower at the end of the season is critical to maintaining its appearance and to help ensure years of dependable service. The following are suggested storage procedures:
1.Thoroughly clean all debris off the mower to prevent damage from rotting grass and standing water.
2.Lubricate all mower grease points and fill spindle oil level as detailed in the maintenance section.
3.Tighten all bolts and pins to the recommended torque.
4.Check the mower for worn and damaged parts. Perform repairs and make replacements immediately so that the mower will be ready for use at the start of the next season.
5.Store the mower in a clean, dry place with the mower housing resting securely on blocks or at ground level.
6.Keep the hydraulic hose ends from sitting in water, dirt and other contaminants. Connect the mower’s hydraulic lines together to prevent dirt and other contamination from entering the hydraulic system.
7.Use spray
Never allow children to play on or around Power Unit or Implement. Children can slip or fall off the Equipment and be injured or killed. Children can cause the Implement to shift or fall crushing themselves or others.
12. TRANSPORTING THE SKID STEER AND MOWER
Inherent dangers of operating the skid steer and mower and the possibility of accidents are not left behind when you finish mowing an area. One must also use good judgement and safe operation practices when transporting the skid steer and mower between locations. By using good judgement and following safe transport procedures, the possibility of accidents while moving between locations can be substantially minimized.
SL60 03/08 | Operation Section |
© 2008 Alamo Group Inc.
