Alamo SL60 manual Front Chain Guard Assembly, Rear Chain Guard Assembly

ASSEMBLY

ASSEMBLY

FRONT CHAIN GUARD ASSEMBLY

1.Attach Chain Guard Bracket (6) to Deflector Bracket (5) using 1/2” x 1-1/4” Bolts (8), 1/2” Flatwashers (2), and 1/2” Locknuts (1). Do not attach ends together at this time.

2.Attach Deflector Bracket (5) to deck using 1/2” x 1-1/2” Bolts (3), flatwasher (2), and locknuts (1).

3.Attach the Right and Left Side Shields (4 and 7) to deck sides using bolts (8), flatwashers (2), and locknuts (1). Insert bolt (3) through top of side shields (4 and 7), deflector bracket (5), and chain guard bracket (6) and secure together using flatwashers (2) and locknuts (1).

4.Tighten all bolts and nuts to the recommended torque. (Refer to Image Asm-R-0271)

REAR CHAIN GUARD ASSEMBLY

1.Place Deflector Strap (6) against mower deck left side and Chain Guard Bracket (8) against mower deck right side. Place Rear Deflector Panel (5) against bracket and deflector and align hole through panel, deflector/bracket, and mower deck and secure together using 1/2” x 1- 1/2” Bolts (4), Flatwashers (2), and Locknuts

(1).

2.Tighten all bolts and nuts to the recommended torque. (Refer to Image Asm-R-0272)

SL60 03/07 Assembly Section 3-4

© 2007 Alamo Group Inc.