ASSEMBLY
3.Place bushing between both arms above mower link and install 5/8” bolt through bush- ing an fasten with 5/8” locknut.
HITCH ASSEMBLY
1.Secure Hitch Weldment (1) to mower deck using 1” x 5” Bolts (7) and 1” Locknuts (6).
2.Insert Bushing (5) in upper holes of hitch weldment, place a set of Upper Floating LInks
(3)on each side of bushing, and secure together using 5/8” x
3.Place bushing (5) into end of Lower Floating Links (4) and secure between upper links with bolt (8) and locknut (9). Place another bushing into opposite lower link hole and place against outside of lugs near center of mower deck. Insert bolt (8) through link, bushing, and lug, and retain together with 5/8” Flat Washer (10), and locknut (9).
4.Secure Safety Chain (2) around lower hitch frame.
5.Tighten all bolts and nuts to the recommend torque. (Refer to Image
SL60 03/07 | Assembly Section |
© 2007 Alamo Group Inc.
