OPERATION

3.5 Auxiliary Hydraulics

The skid steer must be equipped with Front Auxiliary Hydraulics. The hydraulic output capacity of the skid steer must match the equipped mower drive motor. Reference the skid steer operator’s manual to determine the hydraulic output specifications of the skid steer.

A decal is affixed to the mower designating the mower as equipped with either a High, Medium, or Low Flow Motor. If the decal is missing or is not legible, the motor flow volume can be determined from its part number (found on tag attached to the motor) using the table to the right or by contacting Servis-Rhino customer service.

The mower is not shipped equipped with hydraulic hose coupler ends. Coupler ends must be purchased from an authorized skid steer dealer to ensure mower and skid steer auxiliary hydraulic couplers are compatible

.

Part Number

Flow Volume

 

 

 

 

00776387

LOW

 

 

00776388

MEDIUM

 

 

00776389

HIGH

 

 

4. GETTING ON AND OFF THE SKID STEER

Before getting onto the skid steer, the operator must read and completely understand the implement and skid steer operator manuals. If any part of either manual is not completely understood, consult an authorized dealer for a complete explanation. OPS-SS- 0002

SL60 03/08

Operation Section 4-7

© 2008 Alamo Group Inc

OPERATION

Page 91
Image 91
Alamo SL60 manual Getting on and OFF the Skid Steer, Auxiliary Hydraulics, Part Number Flow Volume