Alamo SL60 manual Side Deflector Assembly, Skid Shoe Assembly

ASSEMBLY

SIDE DEFLECTOR ASSEMBLY

1.Place Side Deflector Panel (3) on top lip of left rear discharge chute. Place Side Deflector Strap (4) on top of panel and align holes of strap, panel, and mower deck. Secure together using 1/2” x 1-1/4” Bolts (1) and Locknuts (2).

2.Secure side deflector panel (3) end to chute using bolts (1), Flatwasher (5), and Locknut (2).

3.Tighten all bolts and nuts to the recommended torque. (Refer to Image Asm-R-0273)

SKID SHOE ASSEMBLY

1.Attach Flat Bar Left and Right Hand Skid Shoes (1 and 5) to the underside of the mower side skirts using 3/8” x 1-1/2” Bolts (2), Flatwashers (3), and Locknuts (4). Insert bolts from the underside up to ensure that threads do not become worn and nuts can be removed if skid shoes are to be replaced at a later time.

2.Secure Front Right and Left Hand Skid Shoes (6 and 7, optional equipment) to the front of the mower using bolts (2), locknuts (4), and lockwashers (3). Front skid shoes have multiple hole patterns that enable deck height to be placed at desired mowing height.

3.Tighten all bolts and nuts to the recommended torque. (Refer to Image Asm-R-0274)

SL60 03/07 Assembly Section 3-5

© 2007 Alamo Group Inc.

ASSEMBLY